Samsung OH Series Display Setup
Connecting Ethernet
If you recently purchased a Samsung OH-Series display, follow these steps to connect it to the internet before provisioning.
Step 1: Open the Weather-Proof Data Panel
Open the weather-proof data panel on the back of the display using a star screwdriver. The panel protects the display from outdoor elements, so handle it carefully.
Step 2: Feed the Ethernet Cable
With the panel open, locate the Ethernet port and feed your Ethernet cable into the panel. Avoid pinching the cable when replacing the panel cover to maintain the weather-proofing seal.
Step 3: Connect the Ethernet Cable
Connect the Ethernet cable to the RJ45 (LAN Out) port. This gives the display internet access. Leave the HDBaseT port unused.
Step 4: Power On the Display
Power on the display using the Samsung remote control.
Step 5: Press HOME
Press the HOME button on the remote control to navigate to the main menu.
Step 6: Go to Network Connection
From the main menu, select Network Connection.
Step 7: Run a Network Test
Inside the Network Connection menu, run a Network Test to confirm the display is connected to the internet and to troubleshoot any connectivity issues.
Step 8: Close the Weather-Proof Panel
Once the connection is confirmed, close the weather-proof panel on the back of the display to protect it from outdoor elements.
Provisioning Samsung OH-A-S (Legacy) Display
This section describes how to set up a legacy Samsung OH-series outdoor display that does not support TIZEN Business Manager (TBM).
To access Initial Setup, go to Menu > System > Setup on the Samsung monitor.
Language: Select your preferred language.
Rotation: Choose portrait or landscape depending on your application.
Network Settings: Choose wired or wireless. If you need a static IP, choose IP Settings > Enter Manually.
Play Via: Choose URL Launcher, enter the URL (contact support if you don't have it), then select DONE. Push the right arrow to proceed.
Select SKIP when asked to connect to the RM server.
TV Source: Select I don't receive a TV signal.
Set the current date and time, then push the right arrow to proceed.
Select DONE to complete setup.
Press HOME and select URL Launcher.
Menuboard Manager will download and load. Wait a minute for the monitor to register. An Installation Complete screen will appear with an Activation Code.
Contact support to activate your unit.