BrightSign Setup

Power the BrightSign OFF

Remove the SD card

Insert SD card into your PC

Format the SD card FAT32

Download the Setup Files (ask Support for the files if you don't have them)

Unzip the file

Go into the unzipped folder

Copy all files in the folder

Paste onto the SD card

Eject SD card from PC

Insert SD card into BrightSign

Hold both the RST and SRV buttons on the BrightSign and power ON while holding, until you see the amber LED flash, then let the two buttons go

Firmware update will run (orange progress bar shown on-screen)

Setup will run, several reboots will happen

When complete, you will see an "Installation Complete" screen

Go to Menuboard Manager Units and you will see the unit there, provision the units by first giving it a name, then selecting the Location and Sign

Reload the unit by pressing the "Reload App" button in Units